Differences

This shows you the differences between two versions of the page.

Link to this comparison view

en:ov6 [2006/03/28 20:32] (current)
Line 1: Line 1:
 +===== How to put the Ovislink modem in BRIDGE MODE =====
 +
 +To put the modem back in "bridged" mode, You have to repeat the same operations for the router modem but we have to inverse it. 
 +
 +To put the modem in router mode: 
 +
 +  - Go the **“Configuration”** section 
 +  - Click **“WAN”** 
 +
 +    * You have to change 4 parameters in this section: 
 +      * Change the **“Encapsulation”** option to **"1483 Bridged IP LLC”** 
 +      * Change option **“Bridged”** to **“Enabled”** 
 +      * Take off the username followed by @vif.com under the PPP section 
 +      * Take off the password below it 
 +      * Click **“Submit”** at the bottom of the page
 +
 +  - After go in the **“LAN”** under configurations in the left window 
 +  - Take off the check next to **“DHCP Server”** 
 +  - Click **"Submit"** at the bottom of the page 
 +
 +     * You have to save the whole configurations in the flash of the modem by clicking on “Save Settings” on the left side 
 +     * The modem will make some clicks while it reinitializes, this is normal 
 +     * WAIT AT LEAST 45 SECONDS BEFORE CLOSING THE INTERNET EXPLORER WINDOW OR THE MODEM - THIS IS VERY IMPORTANT
  
 
en/ov6.txt · Last modified: 2006/03/28 20:32 (external edit)
 
VIF Internet 2075 Bl Robert Bourassa #400 Montreal QC H3A 2L1 - 514-353-9988 / sans-frais: 888-321-3737