This shows you the differences between two versions of the page.

Link to this comparison view

en:5667telnet [2006/06/27 23:47] (current)
Line 1: Line 1:
 +==== Configuring with Telnet ====
 +What happens when a client clicks on the reset button. It sets the modem back to router mode, but this modem doesn't work under the router function. So we have to flash back to bridge mode. To flash the modem with telnet you will need to do this.
 +Go to Start/Run, type cmd (a black dos window will pop up)
 +     * type: **telnet** and press **enter** 
 +     * Next follow these steps carefully
 +     * type: **admin** and press **enter**
 +     * type: **admin** and press **enter** again
 +     * type: **bridge add interface wan0** and press **enter**
 +     * type: **rfc1483 add trn rfc1483-0 atm 0 35 llc bridged** press **enter**
 +     * type: **bridge attach wan0 rfc1483-0** press **enter**
 +     * type: **sys config save** press **enter**
 +    "Make sure not to copy paste the command the telnet doesn't like it"
 +  * Try to connect after and you should be able to get online.
en/5667telnet.txt · Last modified: 2006/06/27 23:47 (external edit)
VIF Internet 2075 Bl Robert Bourassa #400 Montreal QC H3A 2L1 - 514-353-9988 / sans-frais: 888-321-3737