Différences

Ci-dessous, les différences entre deux révisions de la page.

Lien vers cette vue comparative

fr:5667flash [2006/03/15 16:13]
fr:5667flash [2006/03/15 16:13] (Version actuelle)
Ligne 1: Ligne 1:
 +===== Doing a hard flash on the modem =====
 +
 +**Procedure for loading 5667 firmware (bridge)** ​
 + 
 +  Connect the serial console cable between the 5667 and the COM port on a PC.
 + 
 +**The console settings are:**
 + 
 +  Bits per Second: 9600
 +  Data bits: 8
 +  Parity: None
 +  Stop bits: 1
 +  Flow Control: None
 + 
 +  1. Power off the 5667 modem.
 + 
 +  2. While holding the space bar, power on the 5667 modem.
 + 
 +  3. The 5667 modem will enter boot mode, you should see the following:
 + 
 +   ​Entered console ...... User request
 +   [ _
 + 
 +  4. Enter the command: xmodem fast
 + 
 +  5. At this point you must change the Bit per Second configuration from 9600 to 38400. Select the disconnect button from HyperTerminal,​ change the Bits per sec, and re-connect..
 + 
 +  6. Select the Transfer pull-down menu and choose the Send.
 + 
 +  7. Click on the Browse button and locate the *.bin file. (5667_Tobago_R3[1][2].1.0.bin located on c:\)
 + 
 +  8. Make sure that you select xmodem as the transfer protocol.
 + 
 +  9. Click Send, this will take approximately 5 minutes.
 + 
 +  10. Once the firmware upgrade is complete, type quit.
 + 
 +  11. At this point you must change the Bit per Second configuration from 38400 to 9600. Select the disconnect button from HyperTerminal,​ change the Bits per sec, and re-connect
 + 
 +  12: The 5667 modem will start-up again.
 + 
 +  13. Once the modem is up, log on via the console, the default password is admin.
 + 
 +  14. Enter the command flashfs update
 +
 +Don’t worry this flash puts the modem directly to BRIDGE ​
  
 
fr/5667flash.txt · Dernière modification: 2006/03/15 16:13 (modification externe)
 
VIF Internet 368 Notre Dame O. suite 200 Montreal QC H2Y 1T9 - 514-353-9988 / sans-frais: 888-321-3737