Configuration avec la console cable

What happens when a client clicks on the reset button. It sets the modem to a regular state with no VPI/VCI set. So we have to flash back the modem with the VPI/VCI. To flash the modem you have to have a console cable and go have hyperterminal. Follow these instructions:

  • Go to the hyperterminal. Start / Programs / Accessories / Communications / Hyperterminal


  • Next window just enter the name: Speedstream and press ok


  • Next window Choose Connect Using: COM1 or COM2 depends on where your serial cable is connected


  • Next window choose Bit per second: 9600 , Databits: 8 and press ok


  • Then you'll see the hyperterminal window just like this


  • Next follow these steps carefully
    • type: admin and press enter
    • type: admin and press enter again
    • type: rfc1483 del trn rfc1483-0 and press enter
    • type: rfc1483 add trn rfc1483-0 atm 0 35 llc bridged press enter
    • type: bridge attach wan0 rfc1483-0 press enter
    • type: sys config save press enter

“Make sure not to copy paste the command the hyperterminal doesn't like it”

  • Try to connect after and you should be able to get online.
fr/5637console.txt · Dernière modification: 2006/03/15 16:07 (modification externe)
VIF Internet 368 Notre Dame O. suite 200 Montreal QC H2Y 1T9 - 514-353-9988 / sans-frais: 888-321-3737