How to put the Ovislink modem in ROUTER MODE

By default, the modem is put in “Bridged” mode, thats why you need to connect with a PPPoE client.

To put the modem in router mode:

  1. Go the “Configuration” section
  2. Click “WAN”
  • Il faut changer 4 paramètres dans cette section:
  • Change the “Encapsulation” option to “ PPPoE LLC”
  • Change option “Bridged” to “Disabled”
  • Put the username followed by @vif.com under the PPP section
  • Put the password below it
  • Click “Submit” at the bottom of the page
  1. After go in the LAN under configurations in the left window
  2. Put a check next to “DHCP Server”
  3. Click submit at the bottom of the page
  • You have to save the whole configurations in the flash of the modem by clicking on “Save Settings” on the left side
  • The modem will make some clicks while it reinitializes, this is normal
  • WAIT AT LEAST 45 SECONDS BEFORE CLOSING THE INTERNET EXPLORER WINDOW OR THE MODEM - THIS IS VERY IMPORTANT
 
en/ov5.txt · Last modified: 2006/03/28 20:15 (external edit)
 
VIF Internet 368 Notre Dame O. suite 200 Montreal QC H2Y 1T9 - 514-353-9988 / sans-frais: 888-321-3737