This shows you the differences between two versions of the page.

Link to this comparison view

en:ht486s1 [2006/10/17 16:39] (current)
Line 1: Line 1:
 +===== Step1: Advanced Settings =====
 +Usually these ATAs are set in router mode so you should be able to get into them easily. \\ \\
 +1. To access the interface go here: http://​
 +{{en:​voip1.jpg}} \\
 +2. Next you need to type in **"​admin"​** and press **enter** . The Advanced Settings will open up.
 +{{en:​voip2.jpg}} \\
 +3. Notice the **"SIP Server"​** , **"SIP User ID"** and **"​Authenticate Password"​** all have entries. ​
 +  * **SIP Server:** Always enter **voip.vif.com**
 +  * **SIP User ID:** Given by the ISP and its mostly in the client'​s account
 +  * **Authenticate Password:** is also given by the ISP and in the client'​s account also.
 +4. These are info the client needs if ever the Grandstream HT-486 has been reset. Next we scroll down to **"​Register Expiration"​** \\
 +{{en:​voip3.jpg}} \\
 +5. Always have **"​Register Expiration"​** set to **60** Seconds. Now we scroll down to **"​Enable Call Features"​** and **"​Send DTMF"​** \\
 +{{en:​voip4.jpg}} \\
 +  * **"​Enable Call Features"​**:​ must be set to **Yes** ​
 +  * **Send DTMF**: must be set to **via RTP (RFC2833)** (normally its put on in-audio which you must remove or else the voice mail box will not work.)
 +6. Now we head to **Reply to ICMP on WAN port** and **WAN Side HTTP Access** \\ 
 +  * **Reply to ICMP on WAN port**: Set to **YES** \\
 +  * **WAN Side HTTP Access**: Set to **YES** \\
 +7. Now go all the way to the bottom and click **Update**. \\
 +{{en:​voip5.jpg}} \\ 
 +8. Then you will get this page \\
 +{{en:​voip6.jpg}} \\
 +9. Before Rebooting we move onto the [[en:​ht486s2|basic settings]].
en/ht486s1.txt · Last modified: 2006/10/17 16:39 (external edit)
VIF Internet 368 Notre Dame O. suite 200 Montreal QC H2Y 1T9 - 514-353-9988 / sans-frais: 888-321-3737