Differences

This shows you the differences between two versions of the page.

Link to this comparison view

en:642r2 [2006/04/04 23:06] (current)
Line 1: Line 1:
 +====== Put the Zyxel modem in Router mode =====
  
 +  * In XP go to **Start/​Run**,​ type: **cmd** | In Windows 98/ME so to **Start/​Run**,​ type: **command**
 +  * enter **telnet 192.168.1.1** and press **enter**
 +{{:​zyxel1.jpg}}
 +  * Password is **1234** and press **enter**
 +{{:​zyxel2.jpg}}
 +  * You should see this screen next **(The Main Menu)**
 +{{:​zyxel3.jpg}}
 +  * Now to set it as **router** mode, Type **1** in the "​**Enter Menu Selection Number:​**"​ and press **enter** . You should end up in the General setup menu
 +{{:​zyxel8.jpg}}
 +  * In order for it to be **router mode** make the following changes (Follow exactly what you see in the previous picture). Then press **enter** to save changes . (in order to modify options you must press the **Space bar**)
 +    - **Route IP = Yes**
 +    - **Bridge = No** 
 +  * Once your back at the main menu, Type **4** in the "​**Enter Menu Selection Number:​**"​ and press **enter**. You should end up in the **Internet Access Setup** menu
 +{{:​zyxel9.jpg}}
 +  * You must have these settings in order for bridge mode: (Just look in the picture above). ​
 +    -  **Encapsulation** = **PPPoE**
 +    -  **Multiplexing** = **LLC-Based**
 +    -  **VPI/VCI** = **0/35**
 +    -  **Username/​password (don't forget @vif.com for the username!)** ​
 +  * Press **enter** to save changes. After pressing **enter** you should end up at the main menu, Type **11** in the "​**Enter Menu Selection Number:​**"​ and press **enter** . You should end up in the **Remote Node Setup** Menu
 +{{:​zyxel6.jpg}}
 +  * Type **1** and press **enter** and you should see this screen:
 +{{:​zyxel10.jpg}}
 +  * Make sure you have these settings ​ (look at the picture above)
 +    -  **Encapsulation** = **PPPoE**
 +    -  **Multiplexing** = **LLC-Based**
 +    -  **VPI/VCI** = **0/​35** ​
 +    -  **Bridge = NO**
 +    -  **Username/​password (don't forget @vif.com for the username!)** ​
 +      * You have to enter the user/pass twice, once under **Incoming:​** and the other under **Outgoing:​**
 +  * After all that, Press **enter** **2** or **3** times to get to the main menu and type 99 in the "​**Enter Menu Selection Number:​**"​ to exit and thats it, your in router mode!
 +
 +   ​Restart Modem and wait 1 min, it should connect to the internet automatically
 
en/642r2.txt · Last modified: 2006/04/04 23:06 (external edit)
 
VIF Internet 368 Notre Dame O. suite 200 Montreal QC H2Y 1T9 - 514-353-9988 / sans-frais: 888-321-3737