This shows you the differences between two versions of the page.

Link to this comparison view

en:5667telnet [2006/06/27 23:47] (current)
Line 1: Line 1:
 +==== Configuring with Telnet ====
 +What happens when a client clicks on the reset button. It sets the modem back to router mode, but this modem doesn'​t work under the router function. So we have to flash back to bridge mode. To flash the modem with telnet you will need to do this.
 +Go to Start/Run, type cmd (a black dos window will pop up)
 +     * type: **telnet** and press **enter** ​
 +     * Next follow these steps carefully
 +     * type: **admin** and press **enter**
 +     * type: **admin** and press **enter** again
 +     * type: **bridge add interface wan0** and press **enter**
 +     * type: **rfc1483 add trn rfc1483-0 atm 0 35 llc bridged** press **enter**
 +     * type: **bridge attach wan0 rfc1483-0** press **enter**
 +     * type: **sys config save** press **enter**
 +    "Make sure not to copy paste the command the telnet doesn'​t like it"
 +  * Try to connect after and you should be able to get online.
en/5667telnet.txt · Last modified: 2006/06/27 23:47 (external edit)
VIF Internet 368 Notre Dame O. suite 200 Montreal QC H2Y 1T9 - 514-353-9988 / sans-frais: 888-321-3737