Configuring with Telnet

What happens when a client clicks on the reset button. It sets the modem back to router mode, but this modem doesn't work under the router function. So we have to flash back to bridge mode. To flash the modem with telnet you will need to do this.

Go to Start/Run, type cmd (a black dos window will pop up)

  • type: telnet 192.168.254.254 and press enter
  • Next follow these steps carefully
  • type: admin and press enter
  • type: admin and press enter again
  • type: bridge add interface wan0 and press enter
  • type: rfc1483 add trn rfc1483-0 atm 0 35 llc bridged press enter
  • type: bridge attach wan0 rfc1483-0 press enter
  • type: sys config save press enter

“Make sure not to copy paste the command the telnet doesn't like it”

  • Try to connect after and you should be able to get online.
 
en/5667telnet.txt · Last modified: 2006/06/27 23:47 (external edit)
 
VIF Internet 368 Notre Dame O. suite 200 Montreal QC H2Y 1T9 - 514-353-9988 / sans-frais: 888-321-3737