Differences

This shows you the differences between two versions of the page.

Link to this comparison view

en:5667console [2006/02/22 23:25]
en:5667console [2006/02/22 23:25] (current)
Line 1: Line 1:
 +==== Configuring with the console cable ====
 +
 +What happens when a client clicks on the reset button. It sets the modem back to router mode, but this modem doesn'​t work under the router function. So we have to flash back to bridge mode. To flash the modem you have to have a console cable and go have hyperterminal. Follow these instructions: ​
 +
 +  * Go to the hyperterminal. Start / Programs / Accessories / Communications / Hyperterminal
 +[[http://​wiki.vif.com/​|{{hyper.JPG}}]]
 +  * Next window just enter the name: Speedstream and press ok
 +[[http://​wiki.vif.com/​|{{hyper1.JPG}}]]
 +  * Next window Choose **Connect Using:** **COM1** or **COM2** depends on where your serial cable is connected
 +[[http://​wiki.vif.com/​|{{hyper2.JPG}}]]
 +  * Next window choose **Bit per second: 9600** , **Databits: 8** and press ok
 +[[http://​wiki.vif.com/​|{{hyper3.JPG}}]]
 +  * Then you'll see the hyperterminal window just like this
 +[[http://​wiki.vif.com/​|{{hyper4.JPG}}]]
 +  * Next follow these steps carefully
 +     * type: **admin** and press **enter**
 +     * type: **admin** and press **enter** again
 +     * type: **bridge add interface wan0** and press **enter**
 +     * type: **rfc1483 add trn rfc1483-0 atm 0 35 llc bridged** press **enter**
 +     * type: **bridge attach wan0 rfc1483-0** press **enter**
 +     * type: **sys config save** press **enter**
 +    "Make sure not to copy paste the command the hyperterminal doesn'​t like it"
 +
 +  * Try to connect after and you should be able to get online.
  
 
en/5667console.txt · Last modified: 2006/02/22 23:25 (external edit)
 
VIF Internet 368 Notre Dame O. suite 200 Montreal QC H2Y 1T9 - 514-353-9988 / sans-frais: 888-321-3737