Setting the 2Wire Modem In Router Mode

To configure the 2Wire 2701HG modem/router to let it stay connected 24/7, you will need to edit a few configuration before log in into it.

1. Open a browser, in the address bar, type 192.168.2.1.
2. Click on “Internet Connection”.

3. Click on “Advanced Settings”.

4. Enter VPI as “0” and VCI as “35”.
5. Set ATM Encapsulation as “Bridged LLC”.
6. Set connection Type as “PPPoE”.
7. Enter your username, password and confirm password.
8. Set forced Upstream MTU as “1492”.
9. Click Save.

In a few minutes, try to browse the internet, you should be able to surf now.

 
en/2wire.txt · Last modified: 2009/03/19 15:45 (external edit)
 
VIF Internet 368 Notre Dame O. suite 200 Montreal QC H2Y 1T9 - 514-353-9988 / sans-frais: 888-321-3737